A full tuning tutorial for the FX Dreamline Compact! The rifle in this video is a 0.22 caliber, but the methods and techniques for tuning reflect to all calibers.
In this video, you will learn how to adjust your transfer port setting, hammer spring adjuster, and your regulator setting to fine tune the rifle to shoot the velocities you are wishing to achieve.
Please keep in mind that the Compacts have much shorter barrels than the standard versions. Due to the shorter barrel, the velocities, even with the rifle maxed out, are much much lower than a standard version of the FX Dreamline. The 0.22 caliber has a 320mm barrel (standard is 500mm) and the 0.25 caliber has a 390mm barrel (standard is 600mm). With this being said, please do not expect to be able to shoot heavier pellets/slugs or have accuracy at long range. Also, the Compact has a much smaller air cylinder, so if you do tune up the rifle, you will have a very low shot count.

Here is a quick list of the velocities per pellet grain weight that are suggested per caliber for the best accuracy for the Dreamline Compact:
0.177 caliber = 880-900 FPS with 8.44gr JSB (320mm barrel)
0.22 caliber = 860-880 FPS with 15.89gr JSB (320mm barrel)
0.25 caliber = 820-840 FPS with 25.39gr JSB (390mm barrel)

Also, the regulator will be set around 140-160Bar, depending on your ammo and caliber.

**Note** Other grain weights of pellets will perform better at different velocities. The best accuracy is always up to the shooter to discover, above mentioned are just common ranges of velocities found for the best accuracy with the accompanied pellet grain weight.

Check out 910 Airgun Tuning and Repairs LLC new website!
910airguntuningandrepairsllc.com

Also, you find this channel on Airgun 101!
https://airgun101.com/index.php/chann...

Please let me know if there are any questions about the video. Please like and subscribe, I am thankful for everyone's support!

If you would like to support future videos: paypal.me/910AGTRLLC

Movie Software: Movavi Video Suite 18
Music: Movavi Video Suite 18
Camera (Video): Samsung Galaxy S9

Disclaimer: Modifying or Tampering with air rifles can be very dangerous, and if done improperly, can cause serious injury and/or damage to property. Always be sure to keep safety in mind while working on your air rifle. Also, please contact your dealer and/or manufacturer before any tampering or modifying. 910 Airgun Tuning and Repairs LLC is not liable for any injury or damage to property due to a viewer tampering, modifying, repairing, or tuning an air rifle. 910 Airgun Tuning and Repairs LLC does not represent FX Airguns or FX Airguns USA in these videos. FX Airguns and FX Airguns USA are not responsible for any possible liabilities from these videos.

If you have any questions about repairs in my videos, or if you are needing assistance with other repairs or a service performed on your rifle, please feel free to reach out to me, via comments below, Facebook Messenger, Instagram direct message or Email. If you need help with your FX airgun, and you are located in the Western Hemisphere (North/South America), you can also contact FX Airguns USA for customer service, technical support, or part orders.

Keep a look out on Instagram and Facebook for video announcements and other updates!
Also check out the website for tuning and repair services, custom parts, as well as DonnyFL and Saber Tactical gear!

Contact:
Facebook: https://www.facebook.com/910-Airgun-T...
Instagram: 910_airgun_tuning_and_repairs
Website: https://910airguntuningandrepairsllc.com
Email: 910airguntuner@gmail.com